Tous les résultats (235)

Capteurs de température enfichables 100 Ohm, -200 C to +300 C, 2.3 x 2.0 mm, IEC 60751 F0.3, 10 mm inversed wires, metallized backside

Capteurs de température enfichables Nickel, 1000 Ohm, 5000 ppm/K, 5.0 x 2.0 mm, -60 C to +200 C, IEC 60751 F0.3, Nickel flat wire gold coated, 0.2 x 0.4 mm (HxW), 7 mm long

Modules de capteurs multifonctions For applications with a conductivity measuring range from 100 S/cm to 200 mS/cm (typical cell constant of 0.68 cm -1)

Détecteurs de flux Sensor, Liquid flow

Détecteurs de flux Flow range from 0 to 1.5 m/s (full bridge mode), -20 C to +80 C, very fast response sensitivity

Capteurs d'humidit enfichables For accurate measurements in low humidity ranges, -40 C to +150 C. 5.0 x 3.81 mm, 10 mm wires

Outils de développement de capteurs multifonction Breakout Board BOB 0.4 for easy contacting and testing withour IR Emitter

Amplificateur RF Driver Circuit Board DCB.S3.175 for IR emitter HIS20smd. HISsmd series. WITHOUT IR emitter (has to be ordered separately)

Émetteurs infrarouges Thermal IR emitter with broadband emission and Winston cone cap, TO-39 / TO-5, 175 mA

Capteurs de force et cellules de charge Force range: 200 N - Application of force: Rivet on bottom side - Contacting: Stranded wires (20cm) with PicoBlade connector - Housing: Screw-on metal housing

Capteurs de température enfichables ESD optimized RTD, 1000 Ohm at 0C, 2.2 x 2 x 1.1 mm, -200C - +600C, IEC 60751 F 0.15, Pt/Ni-wire, oe 0.2 mm, 7 mm long

Capteurs de température enfichables 100 Ohm, 2.3 x 2 mm, -200 C - +400 C, IEC 60751 F 0.3, Ag-wire, 0.25 mm, 10 mm long, perpendicular leads