CC1100RTKG3
Voir les caractéristiques du produit
Fab. :
Description :
Émetteur-récepteur RF Highly Integrated Multi Ch RF Xceiver
Disponibilité
-
Stock:
-
Une erreur inattendue est survenue. Veuillez réessayer ultérieurement.
Fiche technique
Application Notes
- AN047 -- CC1100/CC2500 Wake on Radio (Rev. B)
- AN069 -- Low Cost Long Range One Way Audio Communications at 900 MHz (Rev. B)
- AN085 -- Implementing Diversity Using Low Power Radios
- AN094 -- Using the CC1190 Front End with CC1101 under EN 300 220
- AN095 -- Continuous Data Streaming Applications - Using Serial Synchronous Mode (Rev. A)
- AN096 Using CC1190 Front End with CC1101 under FCC 15.247 (Rev. A)
- AN103 -- Basic RF Testing of CCxxxx Devices
- Antenna Diversity
- CC11xx Sensitivity Versus Frequency Offset and Crystal Accuracy (Rev. D)
- CRC Implementation (Rev. E)
- Debugging Communication Range
- DN006 -- CC11xx Settings for FCC15.247 Solutions (Rev. B)
- DN009 -- Upgrading from CC1100 to CC1101 (Rev. A)
- DN012 -- Programming Output Powers on CC1100 and CC1150 (Rev. A)
- DN017 -- CC11xx 868/915 MHz RF Matching (Rev. A)
- DN022 -- CC110x CC111x OOK ASK Register Settings (Rev. E)
- DN025 -- Johanson Technology Matched Balun Filters (Rev. A)
- DN036 -- CC1101+CC1190 600 kbps Data Rate +19 dBm Transmit (Rev. A)
- DN107 -- DMA and Radio Configuration (Rev. A)
- DN111 - Current Consumption for a Polling Receiver (Rev. A)
- DN300 -- SmartRF04EB Troubleshooting (Rev. B)
- DN400 -- Interfacing CC1100 - CC2500 with MSP430 (Rev. A)
- DN500 -- Packet Transmission Basics (Rev. C)
- DN501 -- PATABLE Access (Rev. B)
- DN503 -- SPI Access (Rev. B)
- DN504 -- FEC Implementation (Rev. A)
- DN505 -- RSSI interpretation and timing (Rev. D)
- DN506 -- GDO Pin Usage (Rev. A)
- DN507 -- FEC Decoding
- DN509 -- Data Whitening and Random TX Mode
Images
- TARIC:
- 8542399000
- CNHTS:
- 8542319000
- CAHTS:
- 8542390000
- USHTS:
- 8542390010
- JPHTS:
- 8542390990
- MXHTS:
- 85423999
- ECCN:
- 5A991.g
France

The G4 and E4 suffixes were added for ROHS conversion. The
G4 and E4 parts are exactly the same as the original parts
without the G4 or E4 suffix.
For lead-frame-based devices, the RoHS-compliant solution
is backward-compatible with lead-based processes; so the
same part is shipped regardless of whether a unique part
number or a standard part number is ordered.
Lead-frame-based unique part numbers will consist of the
standard part number plus a two-character suffix (usually
E4 or G4, sometimes E3, E6, G3 or G6).
"E" = RoHS-compliant
"G" = Green (RoHS-compliant and no Br/Sb)
Please contact a Mouser Technical Sales Representative for
further information.
5-1011-9