Résultats: 315
Sélectionner Image Référence
 Fab.
Description Fiche technique Disponibilité Prix (EUR) Filtrer les résultats dans le tableau par prix unitaire basé sur votre quantité.
Qté. RoHS Modèle de ECAO Type de produit
Produit
Fréquence
Plage de fréquences
Tension de voltage
Impédance
Style du raccordement
Package/Boîte
Température de fonctionnement min.
Température de fonctionnement max.
Marki Microwave Conditionnement de signaux The BT-0040 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.
Fiche technique
513/08/2026 attendu
Min. : 1
Mult. : 1

Signal Conditioning Bias Tees 4 kHz to 40 GHz 30 VDC 50 Ohms Connector
Marki Microwave Conditionnement de signaux The CBR17-0026 offers the broadest bandwidth of any standalone bridge coupler on the market. It provides an extremely high degree of measurement accuracy for forward power measurements, and can also be used to measure VSWR/return loss.
Fiche technique
Délai de livraison produit non stocké 12 Semaines
Min. : 1
Mult. : 1

Signal Conditioning 200 kHz to 26 GHz 200 kHz to 26 GHz Connector
Marki Microwave Conditionnement de signaux The EBAL-0040 is an ultra-broadband 1:2 balun (unbalanced to balanced transformer), hand-tuned for optimal amplitude and phase balance.
Fiche technique
111/09/2026 attendu
Min. : 1
Mult. : 1

Signal Conditioning
Marki Microwave Conditionnement de signaux The HLM-8011 is a high-power GaAs Schottky diode signal limiter featuring high IP3 and high power handling. It offers low insertion loss and low return loss from DC through Ka band and has a typical 1dB compression point of +9dBm.
Fiche technique
2Sur commande
Min. : 1
Mult. : 1

Signal Conditioning 0 Hz to 30 GHz 0 Hz to 30 GHz Connector - 55 C + 100 C
Marki Microwave Conditionnement de signaux The T3-12 is a high performance mixer featuring LO/RF from 10 MHz to 12 GHz and IF from 1 MHz to 4 GHz.
Fiche technique
311/09/2026 attendu
Min. : 1
Mult. : 1

Signal Conditioning Mixers 10 MHz to 12 GHz, 1 MHz to 4 GHz 50 Ohms Connector - 55 C + 100 C
Marki Microwave Conditionnement de signaux The T3-20G is a high performance mixer featuring LO/RF from 10 MHz to 20 GHz and IF from 1 MHz to 10 GHz.
Fiche technique
1Sur commande
Min. : 1
Mult. : 1

Signal Conditioning Mixers 10 MHz to 20 GHz 10 MHz to 20 GHz Connector - 55 C + 100 C
Marki Microwave Conditionnement de signaux The ADM-8344 is a wideband distributed low noise amplifier capable of providing 18 dB gain and +27 dBm OIP3 from DC to 18 GHz and a low 1.4 dB typical noise figure from 4 to 7 GHz.
Fiche technique
101/01/2027 attendu
Min. : 1
Mult. : 1

Signal Conditioning
Marki Microwave Conditionnement de signaux A high-linearity amplifier capable of providing +23 dBm output power up to 6 GHz. The ADM1-8096PC can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
Fiche technique
111/12/2026 attendu
Min. : 1
Mult. : 1

Signal Conditioning
Marki Microwave Conditionnement de signaux A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 3 GHz bandwidth.
Fiche technique
330/10/2026 attendu
Min. : 1
Mult. : 1

Signal Conditioning Baluns 200 kHz to 3 GHz 200 kHz to 3 GHz 50 Ohms Connector
Marki Microwave Conditionnement de signaux A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 6 GHz bandwidth.
Fiche technique
714/09/2026 attendu
Min. : 1
Mult. : 1

Signal Conditioning Baluns 200 kHz to 6 GHz 200 kHz to 6 GHz 50 Ohms
Marki Microwave Conditionnement de signaux The BAL-0026 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 26.5 GHz bandwidth.
Fiche technique
5Sur commande
Min. : 1
Mult. : 1

Signal Conditioning Baluns 300 kHz to 26.5 GHz 300 kHz to 26.5 GHz 50 Ohms Connector
Marki Microwave Conditionnement de signaux The BAL-0036 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 36 GHz bandwidth.
Fiche technique
106/11/2026 attendu
Min. : 1
Mult. : 1

Signal Conditioning Baluns 300 kHz to 36 GHz 300 kHz to 36 GHz
Marki Microwave Conditionnement de signaux A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 6 GHz bandwidth.
Fiche technique
331/07/2026 attendu
Min. : 1
Mult. : 1

Signal Conditioning Baluns 200 kHz to 6 GHz 200 kHz to 6 GHz 50 Ohms Connector
Marki Microwave Conditionnement de signaux The BT-0018 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.
Fiche technique
811/12/2026 attendu
Min. : 1
Mult. : 1

Signal Conditioning Bias Tees 50 Ohms Connector
Marki Microwave Conditionnement de signaux This coupler features a unique air-line construction that simultaneously enables extremely low loss, minimal return loss, and outstanding directivity throughout the entire frequency range to 50 GHz.
Fiche technique
123/10/2026 attendu
Min. : 1
Mult. : 1

Signal Conditioning
Marki Microwave Conditionnement de signaux The CBR16-0003 offers the highest directivity of any standalone 3 GHz bridge coupler on the market. It provides an extremely high degree of measurement accuracy for forward power measurements, and can also be used to measure VSWR/return loss.
Fiche technique
3Sur commande
Min. : 1
Mult. : 1

Signal Conditioning 200 kHz to 3 GHz 200 kHz to 3 GHz Connector
Marki Microwave Conditionnement de signaux The MMIQ-0205HSM is a miniaturized, surface-mount multi-octave 1.75-5.0 GHz IQ mixer. It features matched double balanced mixers connected with an integrated LO hybrid and RF power divider. It can be used for either upconversion or downconversion.
Fiche technique
121/08/2026 attendu
Min. : 1
Mult. : 1

Signal Conditioning
Marki Microwave Conditionnement de signaux MMIQ-0218L is a low LO drive, passive GaAs MMIC IQ mixer that operates across a 9:1 bandwidth. This is an ultra-broadband mixer spanning 2 to 18GHz on the RF and LO ports with an IF from DC to 3 GHz.
Fiche technique
Délai de livraison 12 Semaines
Min. : 1
Mult. : 1

Signal Conditioning Mixers 0 Hz to 3 GHz, 2 GHz to 18 GHz 0 Hz to 3 GHz, 2 GHz to 18 GHz 50 Ohms Connector - 55 C + 100 C
Marki Microwave Conditionnement de signaux The MMIQ-0416H is a high linearity, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 4 to 16 GHz on the RF and LO ports with an IF from DC to 6 GHz.
Fiche technique
123/10/2026 attendu
Min. : 1
Mult. : 1

Signal Conditioning
Marki Microwave Conditionnement de signaux A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 10 GHz bandwidth.
Fiche technique
Délai de livraison produit non stocké 12 Semaines
Min. : 1
Mult. : 1

Signal Conditioning
Marki Microwave Conditionnement de signaux The C13-0140 is a broadband 1-40 GHz, 13 dB directional coupler. The multisection tri-plate stripline design exhibits excellent coupling flatness and VSWR at all ports.
Fiche technique
Délai de livraison produit non stocké 12 Semaines
Min. : 1
Mult. : 1

Signal Conditioning
Marki Microwave Conditionnement de signaux A resistive 2-way power divider that features broadband operation from DC to 30 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
Fiche technique
Délai de livraison produit non stocké 12 Semaines
Min. : 1
Mult. : 1

Signal Conditioning
Marki Microwave Conditionnement de signaux The MM1-1857H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor.
Fiche technique
115/12/2026 attendu
Min. : 1
Mult. : 1

Signal Conditioning
Marki Microwave Conditionnement de signaux A resistive 2-way power divider that features broadband operation from DC to 40 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
Fiche technique
102/10/2026 attendu
Min. : 1
Mult. : 1

Signal Conditioning
Marki Microwave Conditionnement de signaux 2-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications.
Fiche technique
113/11/2026 attendu
Min. : 1
Mult. : 1

Signal Conditioning